adjusting Robbie the Recycle Robot for older kids or grown ups

For older children and adults, create a mask to go with the Robbie the Recycle Robot costume. We used both pieces of a commercially available heavy duty disposable pie tin. We used a rounded wooden peg to push out a nose and eyebrow form in the malleable pie plate material, then CAREFULLY incised some shapes, opening eye holes and mouth with a screwdriver and hammer over a soft towel. (Hint: check the eye openings to make sure that the wearer can actually see!! Also, if the mouth opening is large enough, it isn’t necessary to add nostril openings.)

Using small pliers, we gently bent the edges of each opening towards the back of the mask and crimped the edge flat. With a round peg (a wooden spoon handle would work), we further rolled down the edges— then, though the edges were softer, we TAPED over each edge with sturdy duct tape until there were no sharp points. DO NOT put sharp points next to your face. EVER.

This mask form is NOT for small children.

Once all the inside edges of the face openings in the mask were safely covered, we cut 4 small squares of duct tape and placed one on the front and one directly opposite on the back on each side of the mask about halfway on each side. We made a small opening through the front and back duct tape squares. Using the large chenille stems, we poked from the back through to the front on each side of the mask and made a slight twist in the end of the chenille stem at the front to keep it in place. This makes for comfortable, adjustable mask holders!

Just because we like the decoration with a soupçon of additional unreality, we added small reflectors on the cheeks and secured the plastic top of the pie tin over the mask.

Robbie the Recycle Robot reporting for Halloween duty with his LED light aglow and ready to go!

(The mask is shown resting on top of the completed costume “tunic.” They are two separate pieces.)

fast halloween costume: recycled robot

We know it is on the calendar on the same day EACH year… not like Easter, which wanders around Spring dependent on moons and traditions. It’s not like we have to sing the “30 Days HATH September” song. This is it. The BIG 31… we are yapping on about Halloween, of course. October 31st. HELL—ooo: All Hallow’s Eve. A super holiday for Creatives everywhere where it is celebrated. And yet…EVERY year we get down to the wire with what the heck are we going to wear? Or send the kids out in? (And, oh shoot, need to buy some candy— but not TOO soon or it won’t make it to the big day! We are looking at you, Reese’s peanut butter cups.)

For fun, fast and easy costumes, rev up your imagination and raid the recycling bin and kitchen drawers! Here is a tutorial for Robbie, the Recycled Robot. Your guy can and should look different— just use what you have and what you find in the back of the pantry or the Everything Drawer in the kitchen— you know you have one!

Step 1— Assemble some likely materials and create a work space.

In order to create our Robbie Robot costume, we cut the sides out of two kraft paper grocery bags, turned them inside out so no writing was visible and taped them together. It helped to visualize the design to lay the costume robot “tunic” over a sturdy cardboard box turned on its side. We covered two of the cut out sides of the grocery bags in aluminum foil. They will become the adjustable sides of the robot. Then we covered the sandwiched bags that form the front and back of the robot in foil, leaving the top uncovered as that part will be cut out and folded back to fit over the costume wearer’s head.

Grocery bag sides being covered in foil and tape.

Covering the bag “tunic” with foil and tape. It was helpful to have silver duct tape, but regular invisible tape would work as well! We put a dinner plate down on the top of our tunic to draw the circle that will be cut out to go over the head.

The idea is for the creator to enjoy the PROCESS without seeking perfection!

We pulled some things from the pantry, kitchen drawers, wrapping pile, and garage to create robot decoration— reflective material is a bonus for night time trick or treating!

Our fast process for creating Robbie the Robot is great for kids, but can be adjusted for older kids and grown ups.

When all the grocery bag “tunic” is securely covered with foil and tape, cut into the dinner plate circle at the top and carefully fold back the edges to the inside of the “tunic." Secure the edges all the way around with tape.

At this point, try the tunic on the costume wearer to make sure the opening at the top is wide enough to slip over the head. Also, hold up the two foil-covered side pieces to the edge of the base of the front of the “tunic.” Wrapping each side piece towards the back of the “tunic” on the wearer, mark where the the side pieces land on the back. This is where an attachment will be placed so that the costume fits securely and can be removed. We used large chenille stems curled on the back side of the “tunic" and poked through to the front and then through each side piece. A simple curl of the chenille stem forms a removable “button” holding the sides in place!

Using duct tape for a secure hold, we attached a recycled styrofoam box lid over a small LED light string, reflectors and other bits to add to Robbie’s verisimilitude — but anything or nothing will do! (“tunic” shown draped on top of the a sturdy cardboard box to check placement)

Add simple robot makeup or an aluminum foil covered headband for a young child and Robbie is ready to rock out the door in this low cost, simple, adjustable and lightweight homemade Halloween costume!

fast & easy halloween costumes are close as the recycle bin

All Hallow’s Eve is just around the corner and everyone is thinking about costume possibilities— even these guys!

Revived melty candle. See the full how-to here.

Dressed up for the day (and the day after!) Inspired by #CreativeSprint post by @icklewitch.

Claire Garland knit pattern black cat and white mouse. See more patterns in her Etsy shop.

Going as twins this year! Knit cat mask.

Coming up with a costume, any costume can be taxing enough, but it isn’t always easy to get out and shop these days… Ordering online is a good option, but sometimes time or money is tight. Sometimes a good solution is as close as the recycle bin!

Last Minute Costume Kit (helpful items)

• brain (non zombified preferred, but, eh, it’ll do)

• the internets (if you must, in small doses only— waaaay too many ideas out there)

• kraft paper, grocery bags

• color construction paper or felt

• tacky glue — saves SO much time attaching

• glue gun (so-so on these g-darned painful implements of frustration and strings of glue)

• small sewing kit

• string/twine

• strong tape, any tape

Okay—

Now... think outside the box of preconceived notions and DO NOT under ANY circumstances appropriate sensitive cultural identities!! If you are unsure, just don’t do it.

However, have at it with gnomes, sprites, elves, natural elementals, etc... or sort-of-grown-up Groot thingys...

Be a little weird… We don’t always get a day. This is ours.

diy jack-o-lantern candle

Zombie candle returns from the dead: Upcycle a thrifted candle or less-than-perfect closet find.

Remake a damaged piece into Halloween decoration! This candle got a leeetle too warm in storage.

Warped candle, meet runcible spoon — handy stand-in until sculpting tools are located.

In progress…

Set up a work area. Protect surfaces from wax shavings that will ensue. Mark up a design on the damage face and start carving. Use a picture as a guide or your imagination.

Zombie pumpkin ready for table decoration!